REF: MEN-2026-0441
Dental
LED Dental Curing Light LB 801
Sold & Shipped By
Official Store
Price on Request
Product Code MEN-2026-0441
Condition New
Availability On request
Warranty
Sub-Category
1. High-intensity LED curing light designed for dental composite curing.
2. Wide wavelength range (420–480 nm) suitable for most dental resin materials.
3. Lightweight and compact design (135 g) for easy handling.
4. Built-in installation type compatible with dental units.
5. Energy-efficient operation with low power consumption (<8W).
6. Optical fiber light guide ensures accurate and focused curing.
7. Safety protection system with Class II electrical insulation.
8. Stable curing performance with intensity up to 1200 mW/cm².
9. Designed for intermittent operation to prevent overheating.
2. Wide wavelength range (420–480 nm) suitable for most dental resin materials.
3. Lightweight and compact design (135 g) for easy handling.
4. Built-in installation type compatible with dental units.
5. Energy-efficient operation with low power consumption (<8W).
6. Optical fiber light guide ensures accurate and focused curing.
7. Safety protection system with Class II electrical insulation.
8. Stable curing performance with intensity up to 1200 mW/cm².
9. Designed for intermittent operation to prevent overheating.
1. Model: LED-G
2. Type: Built-in Type Dental Curing Light
3. Environment Temperature: 5°C – 40°C
4. Relative Humidity: 30% – 75%
5. Atmospheric Pressure: 70 kPa – 106 kPa
6. Dimensions: 26 mm × 25 mm × 260 mm
7. Net Weight: 135 g
8. Power Consumption: < 8 W
9. Power Supply: 24V~ 50Hz / 60Hz
10. Wavelength: 420 nm – 480 nm
11. Light Intensity: 1000 – 1200 mW/cm²
12. Electrical Shock Protection Class: Class II
13. Protection Against Electrical Shock: Type B
14. Ingress Protection: Ordinary Equipment (IPX0)
15. Applied Part: Optical Fiber
2. Type: Built-in Type Dental Curing Light
3. Environment Temperature: 5°C – 40°C
4. Relative Humidity: 30% – 75%
5. Atmospheric Pressure: 70 kPa – 106 kPa
6. Dimensions: 26 mm × 25 mm × 260 mm
7. Net Weight: 135 g
8. Power Consumption: < 8 W
9. Power Supply: 24V~ 50Hz / 60Hz
10. Wavelength: 420 nm – 480 nm
11. Light Intensity: 1000 – 1200 mW/cm²
12. Electrical Shock Protection Class: Class II
13. Protection Against Electrical Shock: Type B
14. Ingress Protection: Ordinary Equipment (IPX0)
15. Applied Part: Optical Fiber
1. Connect the LED power supply line with the power (24V~) of dental unit. Tight the nylon thread to the fixation of the dental unit, then it will be available for operation.
Notice: When installing the LED, be sure the power is cut off.
The two power wire should be a little longer than the nylon thread to keep the power wire safe.
2. Take off the red cap from the optical fiber and insert the metal part into the front of the built-in LED.G (Make sure to screw the fiber to the end by rotation).
3. Install the light hood as showed in picture
4. Uninstall the LED, just reverse the procedure above.
Notice: When installing the LED, be sure the power is cut off.
The two power wire should be a little longer than the nylon thread to keep the power wire safe.
2. Take off the red cap from the optical fiber and insert the metal part into the front of the built-in LED.G (Make sure to screw the fiber to the end by rotation).
3. Install the light hood as showed in picture
4. Uninstall the LED, just reverse the procedure above.
